Expert Answers about Flat Mount Trailer Coupler

• How Many Keys Can I Get for the etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Couplers
• The etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2" Ball Couplers # e98893 comes with 2 keys and if you're ordering more than one of these you'll select the "keyed alike" option from the drop down menu on the product page to have matching keys. Otherwise if you're wanting more than 2 keys for this coupler lock you'll have to order the coupler lock and then place an order for the key number that came with the coupler lock.
  view full answer...


• Does Curt 1-1/4 Inch Trailer Hitch Receiver C12076 Include the Ball Mount
• No, the Curt Class II hitch receiver # C12076 does not include a ball mount, hitch pin or clip. You will need to add a hitch ball of appropriate size to match your trailer and a pin and clip # F-4. I have included a link to our page for Class II hitch balls with the required 3/4-inch shank diameter (to match the supplied ball mount which has a 3/4-inch ball hole). With this link you can select a Class II hitch ball of the appropriate size to match your trailer coupler, either 1-7/8 inch...
  view full answer...


• Does the Bulldog Cast Head Trailer Coupler BD4420000317 Come with Mounting Hardware
• For the Bulldog trailer coupler # BD4420000317 you will need to use your own hardware. The bolt holes on the coupler are 5/8 inches in diameter. You will want to use grade 5 or higher quality bolts. The coupler could be welded on, however because this is a cast coupler and welding cast is difficult, it would have to be done by a qualified professional welder with experience in cast welding along with special electrodes to complete a weld installation.
  view full answer...


• Are There Instructions Included with Trailer Coupler Mounting
• There are not any instructions included with the Trailer Coupler 1-7/8 inch Ball 2 inch Channel Tongue 2,000 lbs, part # E112000340. That is because there are two ways it can be mounted. It can be either bolted or welded on, it is up to the trailer owner how he prefers to mount the coupler.
  view full answer...


• Is Hardware Included With Husky Channel Tongue Trailer Coupler
• The Husky Channel Tongue Trailer Coupler, part # HT87076 does not come with the mounting hardware included. This coupler is designed to fit a 3 inch tongue. The hardware needed to install this coupler is two 1/2 inch diameter grade 5 bolts or higher that are about 4 inches long with matching nuts and washers. You can check out the attached product review video for this coupler. This coupler can be welded in place. Welding should be done by a certified professional.
  view full answer...


• Is the Ball Mount and Shank Included with the Reese Stead-Flex Weight Distribution System
• The weight distribution shank and weight distribution head are included with the Reese Steadi-Flex, part # RP66558, that you selected. The only item you will need to complete the installation is a properly sized hitch ball to match the coupler on your trailer. If your trailer has a 2-5/16 inch coupler you will need the Hitch Ball with 2-5/16 inch ball, like part # 63847. If your trailer has a 2 inch coupler you will need the Hitch Ball with 2 inch ball, like part # 63845. If you have...
  view full answer...


• What Hardware is Needed for the Bulldog Heavy-Duty Cast Head Coupler With Wedge Latch
• The Bulldog Heavy-Duty A-Frame Coupler, # BD44150WH301, does not come with the attachment bolts. I have attached two images showing the bolt pattern measurements and the bolt hole sizes. I would recommend using grade 8 bolts, but grade 5 is acceptable and the amount of bolts you will need will depend on how you plan on mounting the coupler. I would recommend using the bolt holes on the side of the coupler to mount to your trailer. I spoke with my contact for Bulldog and he said you will...
  view full answer...


• Is Mounting Hardware Included with Demco A-Frame Trailer Couplers
• Hardware is not included with Demco coupler # DM14793-81. The reason for this is different applications can require different hardware whether it be length or material (because dissimilar metals can lead to corrosion problems).
  view full answer...


• How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike
• For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the etrailer brand locks. They offer the etrailer Stainless Steel 2 Inch Hitch Receiver Lock, part # e98882, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches. For coupler locks they offer the etrailer Stainless Steel 7/8 Inch Span Coupler Lock, part # e98890, which has an inside width of 7/8-inch, and the etrailer Stainless Steel 1/2 Inch Span Coupler...
  view full answer...


• Do Safety Chains Come with Titan 8K Zinc-Plated Drum Brake Actuator
• Safety chains are usually attached to the trailer, not the coupler. Only a handful of the couplers we have include safety chains but # T4093200 is not one of them. If the trailer does not have mounts on it to attach safety chains then some will have to be installed such as # MB12 or # MB58. I have also included a link to the safety chains we carry.
  view full answer...


• Does Draw-Tite # 36408 Include Everything Needed To Tow a Trailer With 2012 Chevy Equinox
• The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36408, will fit a 2012 Chevrolet Equinox. It is the trailer hitch and pin and clip. To be able to tow with this hitch you will still need to purchase the recommended ball mount, hitch ball and the wiring harness for lighting the trailer lights. I am including links to the installation instructions and a install video of the hitch being installed on a 2010 Equinox (same on the 2012 model). The wiring harness for your Equinox would be the Curt...
  view full answer...


• Does a Ball Mount and Hitch Pin Come with Draw-Tite Trailer Hitch 75338, 2008 Jeep Grand Cherokee
• For Class III trailer hitches like the Draw-Tite, # 75338, the ball mount, pin and clips is not included because a Class III hitch does not require a specific ball mount. Lower Class hitches do require a specific ball mount so for many of them we will include it. There is always a recommended ball mount for a Class III hitch but in order to determine the right one for your needs you will want to measure for the rise or drop required to tow the trailer level. What you will do is measure...
  view full answer...


• What is the Weight of the Curt Trailer Hitch 12343
• The Curt Trailer Hitch Receiver # C12343 has a shipping weight of 24-lbs; about 1-1/2 to 2-lbs of that is going to be the packaging. This hitch does come with all of the hardware needed to install your hitch. If you're going to be towing with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For the wiring I recommend using the Tekonsha # 118405 because I've found that the Tekonsha harness converter boxes are a bit more reliable over time. For the hitch ball I...
  view full answer...


• Does The Curt Trailer Hitch Include Mounting Hardware and Wiring For 1996 Ford Probe
• On the Curt # C11720, for the 1996 Ford Probe the mounting hardware is included. It does not come with any wiring. The wiring harness you would need is the Wiring, # C59496. You also need the ball mount # C45521 and pin and clip # F-4. The hitch ball you will need will depend on the trailer coupler size you will be towing. The most common size hitch ball is the 2 inch ball. For the 2 inch ball you will need the Tow Ready 2 Inch Hitch Ball, # 19258. If you have a 1-7/8 inch ball then you...
  view full answer...


• Does Wiring Harness for 2017 Ford Flex Come With Bracket?
• Glad you enjoyed the video; the 4-Pole Trailer Connector # 118472 does not come with mounting brackets you would need No-Drill Mount Bracket # 18140 together with 4-Flat Bracket # 18144. I have attached a video showing you how these brackets work together to mount a 4-flat on your 2017 Ford Flex.
  view full answer...


• Trailer Hitch for Swagman XC2 Hitch Mount Bike Rack on 2003 Subaru Forester
• The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester. To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650. The only time you'll need to use a ball mount, is for trailer...
  view full answer...


• Does Curt Trailer Hitch for a 2015 Honda Civic Come with a Ball Mount
• A drawbar, also known as a ball mount or stinger, is the part that fits into the hitch and provides a platform for a ball that the trailer will couple to. If you are looking at the Curt trailer hitch for a 2015 Honda Civic then you can use # C11391. The drawbar isn't included but you can add one using part # C45521. If you will be towing with the hitch then the ball size used needs to match what the trailer coupler requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. You...
  view full answer...


• Trailer Hitch and Wiring for a 2009 Acura MDX
• Curt Trailer Hitch Receiver # 13354 does not come with a wiring harness; reason being that not everyone is using the hitch for towing so we make each component available separately. To add a 4-Way flat connector to your 2009 Acura MDX you can use # 118424. I have linked videos showing example installations of both the hitch and the wiring for you. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
  view full answer...


• What Parts Do I Need To Install A Curt Trailer Hitch and Wiring On My 2011 Ford Flex?
• All the parts you need to install the hitch is included with the Curt Hitch receiver # 13551. This hitch receiver is for a Ford Flex with dual exhaust. You will need the Curt T-Connector Wiring Harness to allow you to hook up to your camper. The wiring that I recommend for your 2011 Ford Flex is # C55774. This gives you the option of using either a 4-pole connector or a 7-Pole connector. You also need a ball mount like # C74WR for an 8000-lb capacity or the # WSFH2-2 for a 10,000-lb capacity...
  view full answer...


• Recommended Towing Package For A 2022 Toyota Highlander
• When it comes to installing a trailer hitch on your 2022 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle. This hitch has a simple bolt-on installation with no welding required, the hitch has a matte black powder coat finish over a protective base coat which offers superior rust resistance. When it comes to the trailer wiring The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
  view full answer...